- Adiciona Resistência a riscos de lavagem e resistência química
- Brilho incrível
- Durabilidade de até 5 anos
Descrição
Por que usar o Gtechniq Crystal Serum Light?
O Crystal Serum Light é a versão prosumer do mundialmente Crystal Serum Ultra. Oferece 80% do desempenho do Serum Ultra, porém, se aplicado incorretamente, pode ser removido da pintura de seu carro através de polimento.
Quando se trata de adicionar brilho, resistência a riscos de lavagem, contaminação e repelência de sujeira, o Gtechniq Crystal Serum Ultra e o Serum Light são o ápice da proteção de pintura.
O Serum Light forma uma camada inorgânica de 9H opticamente transparente, ultra durável e de alto brilho, suave ao toque. Uma vez aplicado, os níveis de brilho permanecerão no percentil 90 alto por um tempo significativamente maior, quando comparado aos produtos tradicionais de proteção de pintura, e a lavagem do seu carro será bem mais fácil.

Sua camada cerâmica de alta densidade é resistente a produtos químicos de pH2 a pH12. Essa característica também faz contaminantes aderidos, como seiva de árvores, piche e marcas d’água, fáceis de remover.

Ao contrário dos revestimentos convencionais compostos por ceras e polímeros orgânicos, o Serum Ultra e o Serum Light podem resistir a temperaturas muito mais altas e mais baixas. Eles resistem a temperaturas de até -40ºC a + 250 ºC.
Modo De Uso
Storage and Use
- To apply CSL your vehicle must be indoors and it must remain indoors for at least 12 hours after application
- Ambient conditions must be above 3 degrees C and below 25 C
- Wash and then decontaminate your vehicle’s paintwork with Gtechniq W5 Citrus All Purpose Cleaner and W6 Iron and General Fallout Remover. If required, clay your paintwork to remove other bonded contaminants
- If needed, polish your paintwork, either by machine or by hand, to remove any imperfections
- Spray Gtechniq Panel Wipe onto a Gtechniq MF1 ZeroR Microfibre Buff Cloth
- With your panel fully cooled after polishing, taking care to avoid any paint protection film or other types of vinyl film, buff away all polish residues. This process ensures you will get the maximum number of chemical bonds between the coating and your vehicle’s paintwork
- Put on the gloves provided to prevent CSL coming into contact with your skin
- Soak the application pad with two full measures from the pipette and work the liquid into the pad to get an even saturation
- Replace the lid on the bottle and set aside – do not keep the bottle in your hand as this promotes premature curing
- Apply with applicator provided in overlapping strokes to an area roughly 2’ x 2’, or work to the bodylines of the vehicle
- After coating a single small panel or half a larger panel, remove residue with MF1 ZeroR Microfibre Buff Cloth. Always remove from further than you have applied, working from the outside in. It is essential to check for residue
- You may need to buff the same area several times to remove residue. We recommend using two microfibre cloths at any one time. Please note that you are only removing excess product
- When working with coatings, we recommend you inspect the panels with a bright but diffuse light source, not with bright spot lights which are very poor for spotting coating residue
- Avoid buffing with too much force as this can spoil the surface you are protecting, and you may also drag the partially cured coating off the surface
- Take care that the microfibre cloths you are using are rotated sufficiently and quickly so that CSL does not partially cure in the cloth, if it does cure then buffing residue will be significantly more difficult
- If you miss removing residue and it cures fully, you should re-polish this area, and reapply CSL
- As soon as you finish put the microfibres in water, and wash and dry them as soon as possible
- Use CSL within 1 year of purchasing, for best results, once opened use within 3 months
- Store opened bottles in a dry and cool storage area that is out of direct sunlight
Ficha Técnica
Take a look at the Material Safety Data Sheet for CSL